5.3 Device Monitoring

The Device monitoring module helps you find information on the devices connected. Every administrator can configure the module according to its needs. Each user has a unique setup.

Click Edit table display () to change the table settings. A new window will open for you to add columns and change the column arrangement. 

Table items:

• Icon – display the device state (OK or not).
• Device name 
• Device state 
• SIP Proxy – display the SIP Proxy state on a device. If there is an error, mouse click the description to get a detail. 
• Audio test – display the last audio test result; refer to the Configuration manual for 2N IP intercoms.
• Tamper switch – if there is an error, mouse click the description to know when the tamper switch was opened.
• Door state – four state options: 
  1. Closed
  2. Open
  3. Door open too long
  4. Smashed door
• Relay state – two state options
  1. Active
  2. Inactive

• Up time
• Module State – display the state of the connected AXIS A9188 module; refer to Sub. 4.4.5 Lift Control.

Select whether the device shall be monitored or not. Click the crossed-out eye icon to disable device monitoring. The device will turn grey and move to the list end. Click the eye icon to re-enable device monitoring. 

Click the row or pencil icon to display the device detail.