BES KNX

About company

Ingenium, with 100% of our products Made in Spain, is a specialist home automation company on all kind of projects, related to control, such as residential (single flats, houses, Villas, etc.), commercial areas (shops, brand stores, hostelry, etc.) or major infrastructures (Hotels, corporate buildings, stadiums, convention centers, museums, etc.).

BES KNX product line continues to evolve, keep growing with the intention of covering all types of home automation installations that require KNX, the European standard for houses and buildings automation. Actually, we have more than 120 references in our catalogue, from touch screens (with intercom SIP support) or capacitive push-buttons to Actuators, dimmers sensors, gateways (clima, lighting, etc.), power supplies, line couplers, IP routers, etc. More information available in the website

www.besknx.com

Supported features

• Video from intercom
• Calls from intercom
• Door lock control
• Call fordwarding
• Missed call log

Supported versions:

License

No licenses required.

Manual

2N Device configuration

Go to Services/Phone/SIP1. The following data must be entered in this menu:

• Display name
• Phone number (ID)
• Domain (Viip‘s IP)
• Proxy Address (Viip‘s IP)

Once entered, press the Save button  .

To configure the outdoor devices, it is necessary to create a user, to do this, access the Directory menu.

Click on the button  to create a new user and a new window opens in which you enter:

• Name
• Phone number: sip: + a 3 digit number + @ + Viip‘s IP.

E.g.: sip:123@192.168.6.101.

Once entered, press the Save button .

On the main screen you can check that the user has been saved ok.

To configure the door opener button, you must go to Hardware/Buttons menu and click on add button .

Select the user created to associate it with the button on the board and click add.

Once the correct association of the user with the button on the main screen has been verified, press the Save button .

To associate the button created with the relay go to Hardware/Door/Door and assign the switch.

Assigned switch: Switch 1

To associate the button created with the relay go to Hardware/Door/Door and assign the switch.

• Assigned switch: Switch 1

Once entered, press the Save button .

To configure the switch, go to Hardware/Switches/Switch 1 menu and complete the following fields:

• Switch Enabled 
• Controlled Output: Relay 1

• Activation codes: (Activation code to open the door)

Go to Hardware/Switches/Advanced menu.

• Legacy Switch Code 

Once entered, press the Save button .

Go to Services/Phone/Calls

• Call Answering Mode (SIP1): Automatic
• Local Call Receiving Mode: Automatic

 

VIIP Screen configuration

To configure the VIIP device, go to the menu Settings / Connections / Video intercom configuration.

Click on the button + to add a device.

In the configuration window you must enter the following data:

• Name of the plate.
• IP of the board
• Extension (enter any 3 digit number e.g.:101)
• Door opener code, which has to coincide with the one configured on the panel (some panels have restrictions in this code that must be taken into account when configuring).

Once the data has been entered, save is pressed and the VIIP will be configured to receive calls from the outdoor device.