Hikvision DS-8616NI-ST

Content

About

Version

Used Symbols

About

Hikvision is a versatile video management software for the DVRs, NVRs, IP cameras, encoders decoders, etc. It provides multiple functionalities, including real-time live view, video recording, remote search and playback, file backup, etc., for the connected devices to meet the needs of monitoring task. With the flexible distributed structure and easy-to-use operations, the client software is widely applied to the surveillance projects of medium or small scale. This user manual describes the function, configuration and operation steps of iVMS-4200 software. To ensure the properness of usage and stability of the software, please refer to the contents below and read the manual carefully before installation and operation.

http://www.hikvision.com/us/index.html

Version

 

Tested Functions

Hikvision DS-8616NI-ST	2N IP Intercom Version	Scan device	Video from 2N IP Intercom	Audio from 2N IP Intercom	Audio to 2N IP Intercom	Switch control	Events from 2N IP Intercom
-	-	N/S

2N IP Intercom Settings

 Requirements for 2N IP Intercom

Settings of 2N IP Intercom is very simple. You have to go to section "Services –> Onvif" and set there "Discoverable" mode as shown in the picture below. Then you have to create ONVIF account with "Administrator" access level.

 

Finally RTSP stream has to be enabled on 2N IP Intercom. This setting is in the section "Services –> Streaming". You have to enable RTSP server and choose codec. Also please verify that "UDP Unicast Enabled" is checked. All these settings are shown in the picture below.

 

Tested Features

 Video from 2N IP Intercom

After you login into the Hikvision software via web browser go to "Configuration" menu on the top bar and on the left side select "Remote configuration – Camera management – IP camera". You will see there all added IP cameras and you will have a possibility to modify existing one or add new one. Click on the "Add" button as shown in the picture below.

Now you have to fill in all necessary parameters to add new camera into the system. In this example it will be camera from 2N IP Intercom. It means that you have to set IP address of 2N IP Intercom there, choose ONVIF protocol, set port 80 and fill in the username and password (admin : 2n).

If everything was set properly, you should see new camera in the "Live View" menu. After you click on this camera, you will see live video stream from 2N IP Intercom.

Used Symbols

 - Compatible

 - Work with limitation

 - Incompatible