ONVIF Device Manager
Content
About
ONVIF Device Manager is a software application used to administrate network video servers and cameras within CCTV systems. The User Guide describes the product installation, video encoder, network and analytics configuration, the software update and troubleshooting. Thus, the document is intended for the personnel responsible for administrating CCTV systems and separate network video surveillance devices with the help of ONVIF Device Manager.
Version 2
Tested Functions
| ONVIF Device Manager | IP Intercom Version | Scan device | Video from IP Intercom | Audio from IP Intercom | Audio to IP Intercom | Switch control | Events from IP Intercom |
|---|---|---|---|---|---|---|---|
2.19.0.28.5 |  | | N/S | N/S | | | |
2.2.250 | 2.17.0.26.1 | | | N/S | N/S | | |
2.2.250 | 2.13.0.22.1 | | | N/S | N/S | | |
2N IP Intercom Settings
Enable parameter RTSP Server Enabled in menu Services / Streaming.
 |
 |
Tested Features
Launch ONVIF Device Manager from your desktop or Start menu. After launching ONVIF Device Manager, enter user name and password in the corresponding fields at the left upper corner of the window and click Refresh. To remember login and password for the next application launch, check Remember before logging in.
 |
In the Device list click on the your device and select Live video.
 |
In the Device list click on the your device and select Relays. Relays tab contains information on all the relays connected to the device. To configure a relay, perform the following actions: 1. Select a relay from the list on the left. 2. Set relay mode, idle state and delay time. 3. Click Set. To activate or deactivate the relay use the corresponding button.
 |
In the Device list click on the your device and select Events. ONVIF Device Manager can record and display events of various types. Events are displayed in Event list.
 |
Used Symbols
- Compatible
- Work with limitation
- Incompatible