2.2 Mechanical Installation:

2N^® EasyGate IP is designed for mounting on a vertical surface using a DIN rail bracket (35 mm) or a wall bracket using screws fitted to the bracket mounting holes. 

DIN Rail Mounting

No other tool is needed for DIN rail installation. The DIN rail bracket has a standard size of 35 mm. Put the upper inner side of the bracket profile on the DIN rail and push its bottom side to make the bracket click and fit to the DIN rail. Now all you have to do is slide 2N^® EasyGate IP from the top into the bracket profile (A) and fit its position with a screw (B).

Wall Installation

Use the bracket and two dowels with screws included in the package to install 2N^® EasyGate IP on a wall. Drill holes in a selected place and selected height of the wall and insert the dowels. Pass the screws through the bracket holes and screw them into the dowels in the wall. Now all you have to do is slide 2N^® EasyGate IP from the top into the bracket profile (A) and fit its position with a screw (B).