3.2.1.1.1 Call Connection Settings

To make calls with other terminal devices in IP networks, it is necessary to assign the device to a contact in the Directory. 

Connection with 2N Devices in LAN

  1. Make sure that Local calls is enabled on both the 2N devices.
  2. Click Find device above the table. Check the listed device that you want to make connection to. Once the device is added, editing become available.

  3. You can edit the following:

    1. starting a call with the contact by a short press of the call button

    2. allowing the contact to be shown on the display by checking the selected box

    3. basic information​​

  4. Once saved, the contact will be shown in the phone book on the device display.
  5. Make sure that Local calls is enabled on the called 2N device to make a successful call.

Connection with Other Devices

  1. Click Add device above the table to create a new contact or open an existing contact detail.
  2. Click the pencil  icon next to the Phone number to open phone number editing.
  3. Select the type of call:
    • SIP for calls via SIP,
    • rava for calls with Creston,
    • vms for calls with Axis Camera Station,
    • device for calls with a local 2N device.
  4. Enter the calling destination address into the destination field to which the call is to be routed.
    Complete SIP URI in the format user_name@host or the target IP address (e.g.: johana@255.0.255.0 or johana@calls.2N.com). For local calls, fill in the called 2N device ID, refer to Local Calls in 3.2.3.1 Phone.

  5. You can edit the following:

    1. starting a call with the contact by a short press of the call button

    2. allowing the contact to be shown on the display by checking the selected box

    3. basic information

  6. Once saved, the contact will be shown in the phone book on the device display.
  7. Make sure that the call transmitting service is enabled on the called device to make a successful call.