3.2.3.4 User Sounds

2N^® Indoor View signals variable operational statuses with a sequence of tones. If the standard signaling tones do not meet your requirements, you can modify them.

The device allows you to modify sound signaling for the following states:

1. 1. Ringtone before call pickup
   2. Ringing tone
   3. Busy tone
   4. Call end signaling
   5. Doorbell

Sound Mapping

• Sound Message Language – select a language of spoken meassages. If there is a translation available for a mapped sound, the message will be played in specified language. The language defaults to English or to a language-neutral sound if there is no translation.

• Busy Tone – set the busy tone (to be played when the called user is busy).
• Call End Signaling – set the sound to be played upon the call end.
• Ringtone – set the sound to be played when the called user is ringing.
• Ringing before Call Answering – set the sound to be played before answering an incoming call (intercom ringtone).
• Doorbell – set the sound to be played when the door button is pressed.
• Away Message – set the message on absence to be played when the call is not answered (before recording if the answering machine is allowed).

Sound Upload

You can upload up to 10 user sound files to the device and name each of them for better orientation. 

Press to upload a sound file to the device. Select a file from your PC and click Upload. Press to remove a file. Click to play a successfully uploaded sound file (locally on your PC). Press to record a sound file via your PC microphone.