5.2.1.2 User Fingerprint Setting Instructions

To load fingerprints, use the 2N IP Verso (Part No. 9155045) fingerprint reader or an external USB fingerprint scanner (Part No. 9137423E) as follows: 

1a) To load fingerprints via the 2N IP Verso reader, use the web interface at the selected user and click  Load via fingerprint reader module in Directory / Users/ User fingerprints.


1b) To load fingerprints via an external USB fingerprint scanner, use the 2N IP USB Driver and select Fingerprint reader in the Settings and press OK for confirmation. Click Load via fingerprint reader module in Directory / Users/ User fingerprints via the web interface at the selected user. 
 
 


 2) Click to select a finger for fingerprint loading.

 Up to two fingerprints may be saved for each user.


 3) Click SCAN FINGER to load a fingerprint.

 


 4) Place the selected finger on an external USB reader. This process is repeated three times for greater precision. 

 Repeat the process if any inconsistency occurs during fingerprint reading.


 5) If fingerprint scanning is successful, click DONE to confirm the settings.

To set the finger function, click the  icon to display the list of available functions:


  • Open door
  • Silent Alarm; only if Open door is active
  • Automation F1 – generate the FingerEntered event in Automation. F1 helps identify the fingerprint in Automation.
  • Automation F2 – generate the FingerEntered event in Automation. F2 helps identify the fingerprint in Automation.

 


Click SAVE AND QUIT to confirm the fingerprint enrolment and selected functions. 

6) You can check the current settings in the User tab.