3. Phone Line Tones – Operational Tones
2N® EasyGate IP sends tones to the phone line that indicate its operational status. Refer to the list below for behavior at factory default values. The tone frequency is 425 Hz.
- Dial tone
Continuous tone or as configured.
The tone sounds when the line is seized indicating that 2N® EasyGate IP is capable of making a call/modem connection.
- Ringing tone
or as configured.
The tone is played by 2N® EasyGate IP whenever a call is made to the device.
- Busy tone
or as configured
The tone is transmitted whenever:- the called user is busy,
- the called user has hung up (call clearing).
Tip
- Configure the operational tones on the Telephony card (refer to 5.6 Telephony / Dialing).
Factory Default Values of Operational Tones
E Versions
(Part Nos. 5023001E, 5023011E, 5023101E, 5023111E)
| Dial Tone | Busy Tone | Continuous Tone | Ring | |
|---|---|---|---|---|
| Frequency 1 [Hz] | 425 | 425 | 425 | 50 |
| Frequency 2 [Hz] | 0 | 0 | 0 | – |
| Modulation [ms/ms] | continuous | 330/330 | – | 2000/4000 |
US Versions
(Part Nos. 5023001US, 5023011US, 5023101US, 5023111US, 5023201US, 5023202US)
| Dial Tone | Busy Tone | Continuous Tone | Ring | |
|---|---|---|---|---|
| Frequency 1 [Hz] | 350 | 480 | 420 | 25 |
| Frequency 2 [Hz] | 0 | 620 | 0 | – |
| Modulation [ms/ms] | continuous | 375/375 | – | 2000/4000 |
AU Versions
(Part Nos. 5023001AU, 5023011AU, 5023101AU, 5023111AU)
| Dial Tone | Busy Tone | Continuous Tone | Ring | |
|---|---|---|---|---|
| Frequency 1 [Hz] | 413 | 400 | 425 | 25 |
| Frequency 2[Hz] | 438 | 400 | 0 | – |
| Modulation [ms/ms] | continuous | 250/250 | – | 2000/4000 |