5.8.1 Babycall

The Babycall folder helps you set automatic calls. If the Babycall function is enabled, a defined period of time is counted down after the phone off-hook (the default value is 5000 ms). Unless you start dialing by the end of this timeout, 2N^® EasyGate IP signals the dialing end and starts setting up a call to the predefined phone number – from this moment on, 2N^® EasyGate IP behaves as if dialing was terminated in a standard outgoing call. Any dialing during the Babycall timeout countdown cancels this function and a standard outgoing call is made.

• Enable – enable/disable the Babycall function, automatic call without dialing.
• Time – set the time interval between the line off-hook and automatic call beginning.
• Phone number – define the phone number for the automatic call destination. Enter a valid international phone code for international calls.