5. Configuration

The following subsections describe the programmable parameters and functions of 2N^® EasyGate IP. Every configuration change requires saving or device restart. The fields with invalid values are marked red. Changes with invalid values cannot be saved. No change will be set without saving. 

• 5.1 Status
  • 5.1.1 LED
• 5.2 Network
  • 5.2.1 SIM1
  • 5.2.2 SIM2
  • 5.2.3 VoLTE
    • 5.2.3.1 DTMF
  • 5.2.4 WWAN
    • 5.2.4.1 Operátor
    • 5.2.4.2 Data Connection
    • 5.2.4.3 Backup
    • 5.2.4.4 Ping
      • 5.2.4.4.1 Primary
      • 5.2.4.4.2 Backup
• 5.3 My2N / Basic Settings
  • 5.3.1 2N® My2N Security
• 5.4 SIP / Basic Setup
  • 5.4.1 SIP Security
  • 5.4.2 Others
• 5.5 NTP
• 5.6 LIFT1
  • 5.6.1 Info
  • 5.6.2 Battery Status
  • 5.6.3 Parameters
  • 5.6.4 Password
  • 5.6.5 Synchronization
  • 5.6.6 Factory Reset
  • 5.6.7 SMS
• 5.7 SMS / Setting
  • 5.7.1 Commands
    • 5.7.1.1 List of Parameters
  • 5.7.2 Events
  • 5.7.3 Digital Input
• 5.8 Telephony / Dialing
  • 5.8.1 Babycall
  • 5.8.2 Pulse Dialing
  • 5.8.3 Dial Tone
  • 5.8.4 Busy Tone
  • 5.8.5 Ring
  • 5.8.6 AMR Codec
  • 5.8.7 Others
• 5.9 Services / Signaling
  • 5.9.1 Modem via TCP
    • 5.9.1.1 TCP
    • 5.9.1.2 Modem
  • 5.9.2 RS-232 via TCP
    • 5.9.2.1 TCP
    • 5.9.2.2 RS-232
• 5.10 Maintenance / Configuration
  • 5.10.1 Firmware
    • 5.10.1.1 Detail
  • 5.10.2 Batteries
  • 5.10.3 Temperature Monitor
  • 5.10.4 System
  • 5.10.5 Soft Modem
  • 5.10.6 Logs
    • 5.10.6.1 Logcat
    • 5.10.6.2 Diagnostics
• 5.11 Tester
  • 5.11.1 I/O
  • 5.11.2 LED
  • 5.11.3 Test Call