5.7 SMS / Setting

The SMS / Setting folder helps you enable and generally set the SMS sending function.


  • Turn on – enable/disable the SMS sending function.
  • Device Identification – set the device ID for SMS.
  • Event Recipient Phone Number – set the phone number to which an SMS will be sent after an event. 

  • Initial Password – select the parameter whose value will be used as the initial password for authorization in the SMS command.

    Caution

    • The initial password can only be changed using an SMS command, refer to 5.6.1 Commands. Once changed by an SMS command, the initial password can later be changed by an SMS command only.


  • Time Limit (DEF & RST) – set the timeout after which commands can be resent after the device restart.
  • INFO Message Period – set the info SMS sending period in minutes.
  • INFO Message Format – define the INF command reply format by setting space-separated numeric identifiers for the requested parameters. Refer to 5.6.1.1 List of Parameters for the identifier list.