4. Device Control via Display
 |
Sleep Mode
The device automatically goes into the Sleep mode if there is no activity (after selection of a timeout between 15 s and 10 min). Date and time, the current weather information and door contact state can be displayed in the Sleep mode if configured so.
 |
Home Page
The Home page is set as the introductory screen, which is displayed when the device is switched from the Idle mode by a finger touch. It shows the current date, time, temperature and location and provides access to the Logs, Directory and Settings as well as direct activation of the Do Not Disturb mode. The device configuration allows you to display the door contact state notifications and buttons with the selected icons of the configured HTTP commands on the Home page. The Home page dominant is a phone earpiece icon on a blue background, which allows you to make calls to the destinations listed in the Directory. |
Tip
- A long press on the Home page location / current weather area automatically displays the Settings/Weather section.
Detailed device settings are described in the following subsection.
Icons on Display
| Icon | Description |
|---|---|
| DND mode |
| Device configuration |
| Call list |
| Incoming call ringtone volume up |
| Incoming call ringtone volume down |
| Incoming call ringtone volume mute |
| Value up |
| Value down |
| Microphone mute in call |
| Locked, screen lock |
| Unlocked, screen lock activated/deactivated |
| Camera Preview |
| Camera 1 |
| Camera 2 |
| Camera unavailable |
| Back |
| Move up |
| Move down |
| Door contact state display (door open too long, door open by force) |
| Camera video preview zoom in |
The device automatically goes into the Sleep mode if there is no activity (select a timeout between 15 s and 10 min). In this mode, the device only shows the date, time and current weather.